Canon EOS C300 Matte Box Kits

The Chrosziel Kit 450W Canon EOS C300 (EF) (450W-20C300)

Contains the LWS C300, the Super Wide MatteBox (450W-20), and the Flexi-Insertring 110:75/98 mm (450-20) which is connected to the MatteBox by the additional intermediate ring (411-67). This set-up gives users the option to also use the new 114 mm Canon EF Cinema Prime lenses with this matte box. Chrosziel offers matching adapters and rubber bellows.

The Chrosziel HD Kit 456 Canon EOS C300 (PL) (456-20C300HD)

A combination of the LWS C300 HD, the MatteBox 456 Academy Double (456-20), and the Flexi-Insertring (411-68) for 95 to 125 mm lens diameters. This gear is suitable for wide-angle PL-mount lenses up to 12 mm as well as the Canon EF Cinema Primes, the Zeiss CP II and many more.

See Chrosziel’s New Line of Lightweight Supports for the Canon EOS C300 On Our Site
Email or Call Us for More Information, or to Order the New Chrosziel Matte Box Kits for the Canon EOS C300

Long established as the standard other manufactures measure themselves by, the Chrosziel line of Sunshades and Matte Boxes offers a variety of models each designed to meet the specific needs of various formats.

There is a sunshade or matte box made by Chrosziel to fit nearly any size of camera and lens package from the smallest Mini DV 3×3 and 4×4 DV Sunshades up to the largest 6.6×6.6 high end production Matte Boxes.
See More Information on Chrosziel’s Full Line of Matte Boxes »

Zacuto is transforming the form factor of DSLR cameras for video with our electronic viewfinder. The Zacuto EVF is a 3.2” high resolution monitor that is used in conjunction with all the Z-Finder models. This electronic viewfinder is compatible with all cameras with an HDMI output including the Panasonic AG-AF100, Sony FS100, Sony F3, Scarlet, Red One & Epic.

This electronic viewfinder allows you to operate the DSLR camera or any camera with an HDMI port, with the correct form factor for video with the camera “in-line” to your rod system (the most stable way) and your eye in the Z-Finder offset.

Zacuto offers the following 4 Z-Finder EVF’s:

The Zacuto EVF

The EVF snap is our standard EVF that has the Zacuto Z-Finder Frame built into the unit. The Z-Finder Pro or Jr. snap on and off of the monitor. You can use the EVF as a small on-board monitor or as an EVF alone.

Updates Include:
-1080p support for 24, 25 and 30 frames per second
-Frame Store Feature
-Frame Box appearance to Frame Lines menu
-Overhauled the manual scale interface to a much more user friendly version where customers can create up to 8 unique user presets as opposed to 4 in the previous firmware
-Fixed a unit freeze-up problem within the menu screen
-Fixed Loop-Out Bug where turning power off/on when looped to monitor would stop recording in the camera
-Menu indicator added to show when you have selected an option that can be changed with up or down buttons
-NEXFS100 camera preset fixed to display correctly
-D3100 preset now titled D5100

The Zacuto EVF Flip

The EVF Flip has a Z-Finder frame built into the unit that can be flipped open to 180 degrees. You can also pop off the Z-Finder and use the EVF as a monitor similar to the EVF Snap. You can use the Z-Finder Pro or Jr. on this model as well. This is essential when working handheld with a producer or director so that you can show them the shot without having to have them get their eye in the viewfinder. You just flip up and they can see the shot!

Updates Include:
-1080p support for 24, 25 and 30 frames per second
-Frame Store Feature
-Frame Box appearance to Frame Lines menu
-Overhauled the manual scale interface to a much more user friendly version where customers can create up to 8 unique user presets as opposed to 4 in the previous firmware
-Fixed a unit freeze-up problem within the menu screen
-Fixed Loop-Out Bug where turning power off/on when looped to monitor would stop recording in the camera
-Menu indicator added to show when you have selected an option that can be changed with up or down buttons
-NEXFS100 camera preset fixed to display correctly
-D3100 preset now titled D5100

The Zacuto EVF

The Z-Finder EVF is a complete EVF. It includes the EVF Snap model and an optical viewfinder which snaps onto the frame on the monitor. The optical viewfinder contains high quality 2.5x optics with anti-fog shields. The anti-fog is extremely important for reducing fog. It does not have a diopter but will include the Zacuto Z-Finder Extender Frames. The Extender Frames will get the focus close but might not be exact as you can’t dial it in with a diopter like you can with our Z-Finder Pro models.

Updates Include:
-1080p support for 24, 25 and 30 frames per second
-Frame Store Feature
-Frame Box appearance to Frame Lines menu
-Overhauled the manual scale interface to a much more user friendly version where customers can create up to 8 unique user presets as opposed to 4 in the previous firmware
-Fixed a unit freeze-up problem within the menu screen
-Fixed Loop-Out Bug where turning power off/on when looped to monitor would stop recording in the camera
-Menu indicator added to show when you have selected an option that can be changed with up or down buttons
-NEXFS100 camera preset fixed to display correctly
-D3100 preset now titled D5100

The Z-Finder EVF Pro

The Z-Finder EVF Pro is a complete EVF with diopter. It includes the EVF Flip model and an optical viewfinder which will snap onto the frame of the monitor and can flip up 180 degrees. The optical viewfinder contains high quality 2.5x optics with anti-fog shields and a diopter. The anti-fog is extremely important for reducing fog. It will also include extender frames. The Z-Finder Extender Frames allow you to further adjust the focal point of the Z-Finder by semi-permanently stacking the frames via a snap fit onto the skirt of the Z-Finder until the LCD screen is in focus for you.

Updates Include:
-1080p support for 24, 25 and 30 frames per second
-Frame Store Feature
-Frame Box appearance to Frame Lines menu
-Overhauled the manual scale interface to a much more user friendly version where customers can create up to 8 unique user presets as opposed to 4 in the previous firmware
-Fixed a unit freeze-up problem within the menu screen
-Fixed Loop-Out Bug where turning power off/on when looped to monitor would stop recording in the camera
-Menu indicator added to show when you have selected an option that can be changed with up or down buttons
-NEXFS100 camera preset fixed to display correctly
-D3100 preset now titled D5100

The Z-Finder Pro 2.5x

The Z-Finder Pro 2.5x is another one of Zacuto’s Optical Viewfinders that allows DSLR cameras to have the correct form factor for video. It offers 2.5x focusable magnification (3x is available),a 40mm diameter Zacuto optical designed lens, an anti-fog coating protective cover, an eyecup preventing extraneous light leakage, a diopter and a field of view perfectly matched to 3” LCD screens. The diopter allows you to dial in the focus to match your eye. If you need extra focal point you can use the Z-Finder Extender Frames. The Z-Finder Pro 2.5x has a diopter range of -4.75 and up (unlimited with extender frames). These are semi-permanently stackable frames that attach to the skirt of the Z-Finder Pro and extend the Z-Finder glass further way from the LCD screen for people who are farsighted.

The Z-Finder Pro uses our Gorilla Baseplate and Z-Finder mounting frame to mount to the camera. The Gorilla Baseplate attaches to the bottom of your camera using a ¼ 20” screw and the Z-Finder mounting frame attaches to the Gorilla Baseplate using thumb screws. The rubber back mounting frame does not attach to your LCD; it is held in place against your LCD with pressure. This method allows you to quickly remove the Z-Finder Pro by snapping it off the frame. If you want to remove the entire mounting frame from your camera, you can do so by loosening the thumb screws and pulling up on the metal mounting frame to release it.

The Z-Finder Pro 2.5x includes:
- 3 Extender Frames
- Gorilla Plate with DSLR Short Body Frame (Canon 5D/7D/60D-Nikon D300/D90/D7000 type cameras)
- Lens Cap & Protective Boot
- Lanyard Hook and Lanyard
- Z-Finder Dust Cover
- 2.5x lens with an anti-fog coating protective cover
- extra anti-fog coating protective cover*

The Z-Finder Pro 3x

The Z-Finder Pro 3x is another one of Zacuto’s Optical Viewfinders that allows DSLR cameras to have the correct form factor for video. It offers 3x focusable magnification (2.5x is available),a 40mm diameter Zacuto optical designed lens, an anti-fog coating protective cover, an eyecup preventing extraneous light leakage, a diopter and a field of view perfectly matched to 3” LCD screens. The diopter allows you to dial in the focus to match your eye. If you need extra focal point you can use the Z-Finder Extender Frames. The Z-Finder Pro 3x has a diopter range of -2.75 and up (unlimited with extender frames). These are semi-permanently stackable frames that attach to the skirt of the Z-Finder Pro and extend the Z-Finder glass further way from the LCD screen for people who are farsighted.

The Z-Finder Pro uses our Gorilla Baseplate and Z-Finder mounting frame to mount to the camera. The Gorilla Baseplate attaches to the bottom of your camera using a ¼ 20” screw and the Z-Finder mounting frame attaches to the Gorilla Baseplate using thumb screws. The rubber back mounting frame does not attach to your LCD; it is held in place against your LCD with pressure. This method allows you to quickly remove the Z-Finder Pro by snapping it off the frame. If you want to remove the entire mounting frame from your camera, you can do so by loosening the thumb screws and pulling up on the metal mounting frame to release it.

The Z-Finder Pro 3x includes:
- 3 Extender Frames
- Gorilla Plate with DSLR Short Body Frame (Canon 5D/7D/60D-Nikon D300/D90/D7000 type cameras)
- Lens Cap & Protective Boot
- Lanyard Hook and Lanyard
- Z-Finder Dust Cover
- 3x lens with an anti-fog coating protective cover
- extra anti-fog coating protective cover*

• Ronford 3rd. Axis Bracket

  Fluid 7 Attachment
  $350.00 CDN

Dramatically improve the quality of professional or consumer cameras! HyperDeck Shuttle gives you the quality of uncompressed recording direct to common low cost SSDs in the smallest possible size! HyperDeck Shuttle is compact, affordable and battery powered so it’s perfect as a field recorder. HyperDeck Shuttle bypasses your camera’s compression and records from SDI and HDMI direct into the highest quality uncompressed video. SSDs are cheap and fast, so you can edit directly from the SSD media itself. Only SSDs eliminate time wasting file copying!

Perfect Quality

Compression destroys image quality and even high-end cameras compress images. Now you will never compromise quality because you can bypass the camera compression to get perfect uncompressed 10-bit SD/HD video. That’s even higher quality than broadcast decks! Create the sharpest VFX plates for match moving, compositing and more. Get deep dynamic color range for color correction and do perfect, clean keying without jagged edges caused by compression. Even on shots like flyaway hair and multi-colored patterns. Now quality won’t limit your creativity!

Go Anywhere, Record Everywhere!

With a compact and incredibly sturdy design, HyperDeck Shuttle is machined out of a solid block of aircraft grade aluminum! That means you get a design with the strength to go anywhere! Take your HyperDeck Shuttle into the field, on set, to live events, or even on your extreme sport shoots. With an internal battery, just recharge and go! The possibilities are virtually endless!

Solid State Disk (SSD) Technology

Simply plug a 2.5” solid state disk into HyperDeck Shuttle and you get video recording with blazing fast speed, low power consumption and totally silent operation. Now you can eliminate complicated and expensive disk arrays. A single SSD can record uncompressed video effortlessly! Removable media like CF and SxS cards simply cannot match that kind of performance and require slow file copying to use.

HyperDeck Shuttle Mounting Plate

Get the ultimate in flexible mounting! HyperDeck Shuttle Mounting Plate simply replaces the bottom foot on your HyperDeck Shuttle with this innovative mounting plate thats so easy to install it requires only 4 small bolts! Then you get everything you need for an extremely versatile and flexible mounting solution for your HyperDeck Shuttle. Now you can easily secure your HyperDeck Shuttle to a camera rig with your choice of rail mounts, cold shoe mounts, articulated arms and a whole lot more. That’s because HyperDeck Shuttle Mounting Plate features a variety of pre-drilled 1/4″ and 3/8″ holes, making it compatible with every mount accessory you’ll ever need. It also gives you the freedom to power your HyperDeck Shuttle from an external battery. Simply attach a V-Mount or Anton Bauer style battery plate and you’re good to go.

Connect to Professional or Consumer Cameras

With SDI and HDMI inputs and outputs, HyperDeck Shuttle works with virtually every camera, deck or monitor! Effortlessly plug into monitors or televisions for instant on set preview. Use HyperDeck Shuttle as the video playback source for digital signage systems or switchers. Imagine using HyperDeck Shuttle connected to a live production switcher for recording events, and then using it for live playback! HyperDeck Shuttle can do almost anything and it’s so small you’ll take it everywhere!

The world’s most advanced full resolution 2D/3D HDTV and 2K monitoring for DVI, DisplayPort and HDMI monitors. Includes the quality of 4:4:4 SDI video, lookup tables via USB and analog audio outputs. HDLink will solve all your monitoring needs.

Full Resolution HD Monitoring

HDLink connects SDI video directly to any supported DVI-D and DisplayPort based LCD computer monitor for incredible true HDTV resolution video monitoring. HDLink includes 3 Gb/s SDI for high resolution 2K film monitoring when connected to a large 30 inch DVI or DisplayPort display. With every individual pixel in the HD or 2K SDI connection digitally mapped directly to the pixels of the LCD display, you get a perfect digital-to-screen pixel for pixel HDTV or 2K display. Connect any HDMI television or video projector to HDLink for cinema style monitoring! Even large 23 inch CRT based monitors can’t display the full resolution of the HD-SDI signal, but with HDLink you see every pixel in the HD signal, so you’ll always see a perfect image.

Supports both DVI and HDMI

HDLink supports all DVI-D and DisplayPort based digital computer displays and also includes HDMI video support. HDMI supports video at 1080i/50, 1080i/59.94 and 720p/59.94 on any HDMI device. DVI-D and DisplayPort supports displays at 1920 x 1200 (16:10) resolution for all 1080 HDTV formats. When working in 720 HDTV formats you can even use lower cost 1280 x 800 resolution display for pixel for pixel 720p viewing. When working in NTSC or PAL, HDLink can scale to fill the screen making viewing easier.

Affordable 3D SDI Monitoring

Now HDLink Pro supports 3D monitoring for the latest 3D production workflows! HDLink Pro 3D lets you display both dual stream as well as interleaved 3D inputs and then display them on any compatible 3D DVI display or HDMI television. When used with a DisplayPort to HDMI adapter, HDLink Pro 3D DisplayPort also supports HDMI 1.4a for compatibility with the latest full resolution 3D television.

Highest Quality 3 Gb/s SDI in 4:4:4

HDLink introduced the world’s first full HDTV resolution 4:4:4 monitoring solution that supports both standard definition SDI, HD-SDI and HD-SDI 4:4:4 for full resolution color monitoring. Conventional SD and HD video is 4:2:2 based, which limits color detail while 4:4:4 HD video preserves the full color detail which is important for critical keying and feature film work. HDLink Pro is the first solution for the new high speed 3 Gb/s SDI standard for 4:4:4 RGB and 2K film monitoring. 3 Gb/s SDI runs twice the data rate of normal HD-SDI video, allowing 4:4:4 RGB video to be connected using a single SDI connection. 3 Gb/s SDI also allows full resolution 2K feature film quality 2048 x 1556 video to be connected via SDI.

Supports LCD Displays

HDLink supports DVI-D and DisplayPort based digital computer displays. For 1080 and 720 HDTV formats, a 1920 x 1200 (16:10) resolution display is recommended. However, if you’re working in 720 HDTV formats only, then a lower cost 1280 x 800 resolution display is recommended. When working in NTSC or PAL, HDLink can scale up the displayed image to fill the display making viewing easier. Because most computer displays are limited to approximately a 60 Hz refresh rate, HDLink will automatically apply pull-down to allow video frame rates to be displayed.

Blackmagic Design’s founders have had a long history in post-production editing and engineering. With extensive experiences in high-end telecine, film and post, harnessed with a real passion for perfection, Blackmagic set out to change the industry forever.

Blackmagic Design is a manufacturer of video technology products, including products for editing and design, color correction, film restoration, test equipment, monitoring, routers, converters and encoding.

Blackmagic Design Products

• Mini Converters

  Image Gear is a provider of all Blackmagic Mini Converters. They are the only Mini Converters to include auto SD/HD switching, redundant input, AES/EBU and analog on standard 1/4 inch jack connections, combined with advanced 3Gb/s SDI technology.

  View this Product on this site »View Manufacturer’s Website Listing »

 

• HyperDeck Shuttle

  The world’s smallest uncompressed video recorder! Dramatically improve the quality of professional or consumer cameras.

   

  HyperDeck Shuttle gives you the quality of uncompressed recording direct to common low cost SSDs in the smallest possible size! HyperDeck Shuttle is compact, affordable and battery powered so it’s perfect as a field recorder. HyperDeck Shuttle bypasses your camera’s compression and records from SDI and HDMI direct into the highest quality uncompressed video. SSDs are cheap and fast, so you can edit directly from the SSD media itself. Only SSDs eliminate time wasting file copying.

  View this Product on this site »View Manufacturer’s Website Listing »

 

• HDLink

  Eliminate the high cost of HDTV monitoring with HDLink.

   

  The world’s most advanced full resolution 2D/3D HDTV and 2K monitoring for DVI, DisplayPort and HDMI monitors. Includes the quality of 4:4:4 SDI video, lookup tables via USB and analog audio outputs. HDLink will solve all your monitoring needs.

  View this Product on this site »View Manufacturer’s Website Listing »

Highest Quality Teamed with Affordability

Many LCD screens scratch easily and can be costly to replace. Commercial plastic screen protectors tend to wear out quickly and provide no defense against glare. Additionally, products constructed from plastic, or even plate glass, may have a tint that distorts the screen it’s designed to protect.

Rhino glass is constructed from topquality Water White precision optical glass and treated with a long-lasting anti-reflective coating. The result is a durable, yet cost-effective, neutral shield that protects the screens of expensive on-board monitors while preserving their true colors.

Easy to Add, Easy to Clean

Rhino Glass can be attached with selfstick Velcro tape, which ensures easy removal for cleaning or replacement. A Rhino Glass monitor cover can be cleaned with most common glass cleaners.

Fits Common and Custom Size Screens

Rhino Glass works with monitors from all the leading manufacturers. Also offered in custom cut sizes to fit any application.

Rhino Glass Pricing:

• Monitor	Part No.	Glass Size	Price
  ASTRO DM 3005 A	95-280020	6″ x 4.75″	$85.00
  MARSHALL V-R70P	95-280030	4″ x 7.25″	$100.00
  MARSHALL 7″ V-LCD70XP-HDA	95-280031	7.1″ x 4.72″	$100.00
  MARSHALL 7″ V-LCD70XP-HDMI	95-280032	6.6″ x 4.2″	$100.00
  PANASONIC BTLH80W	95-280004	8″ x 4.5″	$95.00
  PANASONIC BTLH900A	95-280002	6″ x 7.75″	$100.00
  PANASONIC BTLH1700	95-280003	16.5″ x 10.5″	$225.00
  PANASONIC BTLH2600	95-280005	25″ x 14.4″	$399.00
  RED MONITOR 5.6”	95-280045	3.625″ x 5.75″	$95.00
  RED MONITOR 7”	95-280046	7.7″ x 4.375″	$100.00
  RED 1 CAMERA BODY DISPLAY	95-280047	2.25″ x 1.375″	$50.00
  SONY BVM-L230	95-280013	19″ x 12″	$348.00
  SONY BVM-L240	95-280012	21.25″ x 11.625″	$375.00
  SONY LMD-9050	95-280011	7.25″ x 5.5″	$95.00
  TRANSVIDEO RAINBOW 2	95-280040	5″ x 3.5″	$75.00

Email or Call Us to Purchase